When using red top wood anticorrosive wood for floor installation, the width of the keel should not be too wide or too narrow. When processing the keel, use anticorrosive materials to delay the life of the entire floor. When laying the floor, pay attention to distinguish the front and back of the anti-corrosion material, and put the relatively well-treated side on the upward side to make his wear period longer. There is no need to add any protective coating when installing. The red tip wood antiseptic wood has antiseptic effect and has certain protection. If consumers are not very satisfied with the color of the red-tipped wood, red-tipped wood, and red-timber preservative wood, it is recommended to use oily or water-based coatings to handle the changes. Redwood is now widely used in Shanghai. Texture dyes can be extracted from sulfur-colored sediments. If you are using the material next to you, the materials may not be laid properly, and there will be some worms, seams, sounds, dirty boards, painted faces, bulging and warping. Some red-tipped wood anticorrosive woods are corrosive to iron nails, so you should use hot-dip galvanized nails or screws for assembly. Replaced wooden components, parts and other products, including data costs, transportation costs, labor costs and other direct capital costs. A Red tip wood anticorrosive wood installation operation: It is recommended that workers wear gloves and wash their hands before eating. Waste wood or sawdust must not be used. The texture is straight, the structure is slightly rough, the quality is hard, the strength is high, and the shrinkage is medium. In June 2004, Cao County was named by the Chinese Forestry Society as the hometown of Chinese paulownia processing, the hometown of Chinese poplar processing, and the hometown of Chinese willow. Without any treatment, it has excellent environmental protection and safety performance. Now advocate environmental protection.